Several C&C models have had changes through their production run – please confirm all critical measurements when ordering. You’ll find the 2nd generation boats built by Tartan down near the bottom.
C&C27 Mk1 Rudder
We had a damaged C&C 27 Mk1 rudder come into the shop for replacement. We measured it up and built a new blade and post to the original dimensions (but lighter!)
The Mk3 shape is also a possible replacement for the Mk1.
Price is for rudder blade only. Replacement post quoted separately.
Click Here for Price Post Feedback
C&C27 Mk3 Rudder
The C&C 27 web people were not only nice enough to put a dimensioned sketch of the MkIII rudder online, but they also included a link to Phil’s Foils. We’ve now built a few of these, both for wheel and tiller steering.
The Mk3 shape also makes a nice upgrade for the Mk1 and Mk2.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C27 Mk5 Rudder
This one’s for the transom-hung C&C 27 MkV. We guarantee our replacement will be much lighter than the factory unit while being more than strong enough.
Click Here for Price Post Feedback
C&C30 HP
CCI was proud to be the OEM supplier of carbon fiber rudder posts during the production run of this high performance boat.
Need a rudder? We can supply.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C30 Redwing Rudder
The story on this design is a bit different. A customer requested an updated rudder to replace the rather dated “scimitar” rudder design on his boat. We did a bit of research and came to agreement on this design. He provided a newly fabricated post, but then put the project on “indefinite hold” and eventually disappeared from sight. So we have a nice design, waiting for the first customer.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C33 Rudder
Our customer provided detailed drawings, and we reproduced his delaminated rudder with high quality and much lower weight – thanks in part to using a carbon fiber post. ‘glass over CNC-milled foam core construction.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C34 Plus Rudder
This design came from a 3D Scan of the original, for an accurate reproduction of key dimensions, and then we updated the planform upon request for a bit more draft.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C35 MkI Rudder
The “scimitar” shape of the original C&C 35 Mk I rudder was perhaps not their best idea. We developed a more conventional design for our customer, much in the way that the C&C 27 evolved from the MkI to MkIII.
Click Here for Price Post Feedback
C&C35 Mk3 Rudder
We have done rudders for many different C&C models, in the spring of 2011 we were pleased to add the 35-3 to our list via a boatyard in Chicago.
Click Here for Price Post Feedback
C&C36 Rudder
This design started with a 3D scan of our client’s original.
Click Here for Price Post Feedback
C&C37 Rudder
We had one of these come in to the shop that was, honestly, horribly unfair and very waterlogged. Our replacement, while of the same planform, is a much nicer section and considerably lighter.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
Phil,
After a couple of months of sailing with the new rudder I couldn’t be more pleased. The boat is much more balanced and the issues with a very heavy helm that got loaded up with a lot of weather helm are gone. Boat handling is dramatically. I just sailed the boat from Annapolis, MD to Bermuda and back as part of the Bermuda Ocean Race and took second in my class. Everybody is impressed with what a change it’s made.
Regards,
– Steve
C&C37R Rudder
We’ve taken a 37R rudder from a rather chunky shoal draft design to one with more ‘normal’ aspect ratio. If you want one in the original shape, we have those dimensions too.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C38 Rudder
This is a deeper alternative to the original C&C 38 rudder. The design was provided by our client, and we built a new blade around his original, but lengthened, post.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C38 Landfall Rudder
So many C&C models! Yes, we make a rudder for the 38 Landfall. Shown below installed on the client’s boat, after application of anti-foul paint (not included)
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C39 Rudder
The customer commissioned this updated design from Robert Perry Yacht Design (royalty due on purchase)
The blade was built around his original rudder post. The replacement is higher in aspect ratio (and lighter, due to construction method).
Price is for rudder blade only. Replacement post quoted separately.
Click Here for Price Post Feedback
C&C Northeast 39 Rudder
CCI is pleased to offer this replacement rudder for the Northeast 39 designed to match the factory dimensions. Built using E-glass vacuum bagged over a CNC shaped foam core, this rudder can be built with a full carbon fiber post or stainless steel post.
Click Here for Price Post Feedback
C&C40 Rudder
CCI has a design for the C&C40. And if we didn’t, we’d draw one just for you!
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C41 Rudder
We had one of these hand delivered by a customer living a few hundred kilometers away. Heavy! Our replacement is much lighter while still being of very robust construction.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C44 Rudder
We have a design for the C&C 44, unfortunately did not save a photo of the finished rudder prior to shipping.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C110 Rudder
A C&C110 racing team came to us to upgrade the rudder in their boat. The design is to the same planform as the original, but is lighter in weight with carbon shaft and proper cross sectional shapes.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C115 Rudder
Of course CCI can provide a new rudder for your C&C 115.
Shown below before shipping, complete with new carbon fiber post by CCI and Jefa rudder bearing sleeves.
Price is for rudder blade only. Replacement post quoted separately
Click Here for Price Post Feedback
C&C 115 Bowsprit
For this project we first milled a foam test piece to verify fit to the bow, based on dimensions the customer had provided. Then we proceeded to build the unit itself. This sprit allows a headsail to be set an additional 15″ off of the bow.
Click Here for Price Post Feedback
C&C121 Rudder
Built to original C&C 121 drawings, this rudder boasts an autoclaved carbon fibre post, and foam core with vacuum bagged fiberglass skins. Our design is substantially lighter than the original rudder, while maintaining a robust construction.
